高额定电压小直流电压耐压试验报告仪（耐电弧放电耐压试验报告仪）-（运算机管理）

High voltage low current tester (arc resistance tester) - (computer control)

好产产品英文名称：耐电弧试验机

Product name: electric arc resistance tester

护肤品型号规格：NDH-A

Product model: NDH - A

充分满足标准的：GB/T 1411-2002《粉末状隔绝食材耐高压得很低的工作电流弧光发出电的现场实验》（就是指IEC  61621-1997）及ASTM D495等规范标准的需要结构设计制造厂的，并不符合IEC 149、UL 746A等检测手段

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

核心适合比率及的功能：

本检测机是依照规定APP于交流电动机、家庭用的电气产品和家庭用的家庭用的电气产品等的行业的电工作业用塑、树脂材料胶胶和隔热电阻电阻漆等隔热电阻电阻涂料的耐焊弧功效考评，主在液态隔热电阻电阻涂料如：塑、聚酰亚胺膜、树脂材料胶、白云母、瓷质、窗户玻璃、隔热电阻电阻油、隔热电阻电阻漆、瓦楞纸板等媒介的耐焊弧功效测评；

本冲击材料试验机由计算方法机管控行驶，就能够显示信息如今试验性的情形及试验性期限，试验性停止后并永久保存如今试验性统计资料，并可直接打印.标淮调查汇报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为横竖一体式结构类型，下边为方法系统性，上面为试验检测箱。

2 本成品按照*新智慧控制技艺，经过选程序流程（IEC或ASTM）可电脑自动对其进行耐压试验，并在计算机上体现检验时候和后果。

3 **性能指标比较好，抗打扰能力素质强，考试gps精度就越高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 脉冲通断准确时间数据误差：高于 ±10ms

2 调压器功率：2kVA

3 额定功率实验设计交流电压：12.5kV

4 试验报告电压值gps精度：±3%

5 直流电压把控好线性度：±10%  瞬时电流测量方法高精度：1.5%

6 电级对样品的压力：（0.5±0.05）N

7 金属电极的材料：钨棒

8 工业空距：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 便用生态温度表：（23±2）℃

10 应用氛围室内温度：（50±5）%

11 电压：220V±5%  50Hz  10A

12 应力测试    手段：   执行标准/美标/10 mA 连续不断/20 mA 不间断/30 mA连着/40 mA间断

13 冲击试验系统程序有以下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 产品设备主要参数：

NDH-A    耐焊弧检测仪-微机保持

NDH-B    耐电孤做实验的时候仪-触感屏有效控制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！